PCB Materials Glossary - See complete glossary here.
Also visit our FAQ section.
 |
|
|
|
||||||||||||||
| FR4 | FR stands for Fire Retardant. FR4 is a glass fiber epoxy laminate. It is the most commonly used PCB material. A 1.60mm FR4 uses 8 layers of (7628) glass fiber material. The red UL/manufacturers logo is in the middle (layer 4). There are two types of logos: red and blue logos. Red is UL94-V0, blue is UL94-HB. If you have a blue logo material, it is either XPC (phenolic) or G10 (glass epoxy); these are older materials. The main usage of G10 nowadays is for thin watch circuit - since it is very punchable. In 1.50/1.60mm FR4 the logo is in the middle layer (layer 4) of the common 8 layer construction. | ||||||||||||||||||||||||||||||||
| Standard rigid FR4 | Designed for use in high density multi-layer boards, FR4 is suitable for surface mount multi-layers, MCM-Ls, direct chip attach, automotive and wireless communications. The characteristics of FR4 also make it particularly beneficial in high volume fine line multi-layers and PCMCIA applications. The predictability and consistency of this material provides for tremendous ease of processing at the circuit board fabrication site, and its electrical and mechanical characteristics make it user friendly for both designers and fabricators of critical circuits. |
||||||||||||||||||||||||||||||||
| CEM-3 (CEM - Composite Epoxy Material) |
CEM-3 is very similar to FR4. Instead of woven glass fabric a 'flies' type is used. CEM-3 has a milky white color and is very smooth. It is a complete replacement for FR4 and has a very large market share in Japan. | ||||||||||||||||||||||||||||||||
| Prepreg | A 'prepreg' is an epoxy coated glass fabric. It has two usages: as a dielectric in multilayer PCBs, and as the raw material for FR4. 8 layers of '7628' prepregs are used in one sheet of 1.60mm FR4. The central layer (number 4) usually carries the red company/UL logo.
Prepregs come in various thicknesses:
|
||||||||||||||||||||||||||||||||
| PCB materials for Flex and Rigid-flex applications | Flex and Rigid-flex circuit boards have become increasing popular due to their unique applications. Flex and Rigid-flex circuit boards can do what regular standard rigid circuit boards can not do. They can fold, twist, and wrap around tight/small packaging area. Most flex circuit boards are being manufactured using "Kapton", a material developed by Dupont Corporation. This polyimide film based material is resistant to heat, has dimensional stability and a low dielectric constant of 3.6. There are three variants of the Kapton material: 1. Pyralux LF (Acrylic Base Adhesive-not Flame Retardant) 2. Pyralux FR (Acrylic Base Adhesive-Flame Retardant) 3. Pyralux AP (Adhesiveless-for more Demanding high-performance applications) Learn more about Kapton at www.Dupont.com |
||||||||||||||||||||||||||||||||
| PCB materials for RF/Microwave/High Speed applications | As circuit speeds continue to escalate and wireless communications proliferate, the need for a high frequency circuit boards becomes paramount. Here are some typical materials used in high frequency PCB constructions: Rogers Corporation Arlon |
||||||||||||||||||||||||||||||||
| Hybrid PCB materials | Hybrid circuit boards are a way of reducing cost. It is a process of combining standard FR4 laminate with other RF/microwave/high speed laminate. The technology gives engineer the ability of controlling the design on desired layer(s) yet still reducing cost with standard FR4 on the remaining portion of the circuit boards. Learn more about the PCB materials at: |
||||||||||||||||||||||||||||||||
| Other Definitions: | |||||||||||||||||||||||||||||||||
| CTI |
Stands for Comparative Tracking Index. It indicates the highest usable voltage for a laminate. It becomes important in application with high humidity, such as washing machines or cars. A higher index means a better protection. Similar is 'PTI' and 'KC' | ||||||||||||||||||||||||||||||||